Lightweight Curtain with a Subtle Pattern B-2710–B-2715

1. Measure the width of the hanging system. Measure from one end of the track to the other. For a curtain pole, measure the usable length without the decorative finials. Do not measure only the glass or multiply the width yourself.

2. Measure the height once. Hold the tape measure vertically from the hanging point to the floor. For hooks, measure from the point where the curtain will hang; for eyelets, measure from the top of the pole. Record this measurement without deducting centimetres or adding hem allowances. We will confirm the details by telephone before sewing.

3. Choose the fullness. For a curtain or drape that closes across the full width, the pole length is multiplied by 2.5 for a softer gather or by 3 for a fuller gather. For a decorative side drape, we allow 2.5 metres of fabric for a softer gather or 3 metres for a fuller gather per panel. For Wave headings, we confirm compatibility and fabric quantity against your system.

4. One or two panels? One panel is a single piece. Two panels are two pieces of the same fabric that open from the centre. For full coverage, the total fabric quantity is divided between them. For decorative drapes, each side panel requires 2.5 or 3 metres of fabric.

Enter all measurements in centimetres. We will confirm the final details by telephone before sewing.